Description
Technical data
Control circuit
| Nominal input voltage UN | AC 230 V |
| Input voltage range | -20 … +10 % |
| Nominal input current at UN | 8.3 mA |
Load circuit
| Number of changeover/switchover contacts | 4 |
| Contact material (relay) | AgCe |
| Limiting continuous current | 5 A |
| Inrush current (resistive) max. | (AC) 15 A / 4 s |
| Switching voltage (max.) | AC 250 V |
| Switching power (resistive) max. | AC 1250 VA; DC (see load limit curve) |
| Switching capacity | AC-15: 1 A / AC 240 V; DC-13: 2 A / DC 24 V |
| Recommended minimum load | 12 V / 100 mA |
| Pull-in time (typ.) | 25ms |
| Drop-out time (typ.) | 35ms |
| Bounce time (typ.) | 4ms |
| Electrical life (NO; resistive load; 23 °C) | 100 x 10³ switching operations |
| Mechanical life | 20 x 10⁶ switching operations |
Signaling
| Status indicator | Red LED Mechanical |
Safety and protection
| Rated voltage | 300V |
| Rated surge voltage | 2.5kV |
| Overvoltage category | II |
| Pollution degree | 2 |
| Dielectric strength (control/load circuit) (AC, 1 min) | 1.5 kVrms |
| Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
| Dielectric strength (load/load circuit) (AC, 1 min) | 1.5 kVrms |
| Insulation type (control/load circuit) | Basic insulation |
| Insulation type (open contact) | Functional insulation |
| Insulation type (load/load circuit) | Basic insulation |
| Insulation type (adjacent devices) | Reinforced insulation (safe isolation) |
| Protection type | IP20 |
Connection data
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.34 … 1.5 mm² / 22 … 16 AWG |
| Fine-stranded conductor | 0.34 … 1.5 mm² / 22 … 16 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
| Note (conductor cross-section) | 2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG |
Reviews
There are no reviews yet.