Description
Technical data
Control circuit
Nominal input voltage UN | AC 24 V |
Input voltage range | ±10 % |
Nominal input current at UN | 34 mA |
Load circuit
Number of changeover/switchover contacts | 1 |
Contact material (relay) | AgNi 90/10 |
Limiting continuous current | 16 A |
Inrush current (resistive) max. | (AC) 30 A / 4 s |
Switching voltage (max.) | AC 250 V |
Switching power (resistive) max. | AC 4000 VA; DC (see load limit curve) |
Switching capacity | AC-15: 6 A / AC 250 V; DC-13: 2 A / DC 24 V |
Recommended minimum load | 12 V / 10 mA |
Pull-in time (typ.) | 10ms |
Drop-out time (typ.) | 35ms |
Bounce time (typ.) | 6ms |
Electrical life (NO; resistive load; 23 °C) | 30 x 10³ switching operations |
Mechanical life | 5 x 10⁶ switching operations |
Switching frequency with/without load (max.) | 6 min-1 / 600 min-1 |
Signaling
Status indicator | Red LED |
Safety and protection
Rated voltage | 250V |
Rated surge voltage | 4kV |
Pollution degree | 3 |
Dielectric strength (control/load circuit) (AC, 1 min) | 5 kVrms |
Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
Safety information 1 | A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements. |
Protection type | IP20 |
Reviews
There are no reviews yet.