4-conductor through terminal block


4-conductor through terminal block; 1 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; red

SKU: 2000-1403 Category:


Electrical data
Ratings per IEC/EN
Ratings per IEC/EN 60947-7-1
Nominal voltage (III/3) 800V
Rated impulse voltage (III/3) 8kV
Rated current 13.5A
Rated current 2 17.5A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings per UL
Approvals per UL 1059
Rated voltage UL (Use Group B) 600V
Rated current UL (Use Group B) 15A
Rated voltage UL (Use Group C) 600V
Rated current UL (Use Group C) 15A
Ratings per CSA
Approvals per CSA 22.2 No 158
Rated voltage CSA (Use Group B) 600V
Rated current CSA (Use Group B) 10A
Rated voltage CSA (Use Group C) 600V
Rated current CSA (Use Group C) 10A
Ex information
Reference hazardous areas See installation notes in section “Knowledge” and Downloads – Documentation – Additional Information: Technical Section; Technical explanations
Ratings per ATEX: PTB 11 ATEX 1041 U / IECEx: PTB 11.0093U (Ex eb IIC Gb)
Rated voltage EN (Ex e II) 550V
Rated current (Ex e II) 13A
Rated current (Ex e II) with jumper 12A
Power loss
Power loss, per pole (potential) 0.434W
Rated current IN for specified power loss 13.5A
Resistance value for specified, current-dependent power loss 0.002Ω


Connection data
Total number of connection points 4
Total number of potentials 1
Number of levels 1
Number of jumper slots 2
Connection 1
Connection technology Push-in CAGE CLAMP®
Actuation type Operating tool
Connectable conductor materials Copper
Nominal cross-section 1 mm²
Solid conductor 0.14 … 1.5 mm² / 24 … 16 AWG
Solid conductor; push-in termination 0.5 … 1.5 mm² / 20 … 16 AWG
Fine-stranded conductor 0.14 … 1.5 mm² / 24 … 16 AWG
Fine-stranded conductor; with insulated ferrule 0.14 … 0.75 mm² / 24 … 18 AWG
Fine-stranded conductor; with ferrule; push-in termination 0.5 … 0.75 mm² / 20 … 18 AWG
Note (conductor cross-section) Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
Strip length 9 … 11 mm / 0.35 … 0.43 inches
Wiring direction Front-entry wiring


There are no reviews yet.

Be the first to review “4-conductor through terminal block”

Your email address will not be published. Required fields are marked *