Relay module; Nominal input voltage: 230 VAC; 1 changeover contact; Limiting continuous current: 16 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray

11.25

Connection data
Connection technology Push-in CAGE CLAMP®
Solid conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inches
Compare
SKU: 788-508 Category:

Description

Technical data
Control circuit
Nominal input voltage UN AC 230 V
Input voltage range ±10 %
Nominal input current at UN 3.5 mA
Load circuit
Number of changeover/switchover contacts 1
Contact material (relay) AgNi 90/10
Limiting continuous current 16 A
Inrush current (resistive) max. (AC) 30 A / 4 s
Switching voltage (max.) AC 250 V
Switching power (resistive) max. AC 4000 VA; DC (see load limit curve)
Switching capacity AC-15: 6 A / AC 250 V; DC-13: 2 A / DC 24 V
Recommended minimum load 12 V / 10 mA
Pull-in time (typ.) 10ms
Drop-out time (typ.) 35ms
Bounce time (typ.) 6ms
Electrical life (NO; resistive load; 23 °C) 30 x 10³ switching operations
Mechanical life 5 x 10⁶ switching operations
Switching frequency with/without load (max.) 6 min-1 / 600 min-1
Signaling
Status indicator Red LED
Safety and protection
Rated voltage 250V
Rated surge voltage 4kV
Pollution degree 3
Dielectric strength (control/load circuit) (AC, 1 min) 5 kVrms
Dielectric strength (open contact) (AC, 1 min) 1 kVrms
Safety information 1 A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
Protection type IP20

Reviews

There are no reviews yet.

Be the first to review “Relay module; Nominal input voltage: 230 VAC; 1 changeover contact; Limiting continuous current: 16 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray”

Your email address will not be published. Required fields are marked *